[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re: IRCD ???
Does ircd have a FAQ? If there is one, I'd suggest you add this question to the FAQ as it seems to be THE most often asked question here :)
________________ Reply Header ________________
Subject: Re: IRCD ???
Author: Walter Campbell <wcampbel@xxxxxxxxxx>
Date: Mon, 18 Sep 2000 17:36:48 +0100
Look at your Y lines and the Maximum connections #define in config.h
Make the Maximum connections either 256 or 1024, depending on your system and your needs.
You need to set Y lines to allow the proper number of users. Without explicit Y lines, it will use values that are #define'ed in config.h which are very conservative. example.conf will be your best source, but an example is below:
Y:1:90::100:500000:3:10
The 1 is the class (used in I, O, C, N lines)
90 is the ping timing
The third field is unused
The 4th field is what you are interested in, it describes the maximum
links permitted (per I line)
The 5th field is the maximum sendQ
6th and 7th are for "clone control", 6th on your server, 7th on the whole
network
Make sure that your I line specifies the Y line class you want
for example:
I:*@*::*@*::1
You will most likely want different Y line classes for each "class" of client. One for normal clients, one for opers, and a few for servers seems to be the standard for small networks.
Good luck and read through example.conf. There is a lot of information there.